Environmentally, examples of the use of dredging are to clear waterways also to collect sand in order to repair coastal erosion. Industrial and commercial uses dredging are for example the collection of materials used in concrete production and the dredging for valuable trace substances.

Dredging has become an essential operation in process of flood prevention through increasing an area’s capacity for holding or carrying water away.

Dredging requires not only the correct craft but also the correct dredging equipment which is mainly the dredging bucket. Each type of dredging project requires a different type of bucket as each location and material required to be dredged is different.

Dredging buckets are made by the process of the fabrication of steel through welding. They are either constructed in a workshop or onsite depending on the nature of the usage and location. Dredging buckets can range from 3m3 to 25m3. The first process is to design the bucket using CAD software and then the drawing service. It is these critical initial stages that enable the bucket to be fabricated.

The materials used in the construction of dredge buckets, excavator buckets and mining buckets are highly sophisticated. The steel is high strength and abrasion resistant with tungsten or chromium carbide wear protection systems. Each bucket is ESCO wear resistant encompassing their protection systems and are bushed and line bored.

As mining, excavation and dredging buckets are often used in challenging and demanding situations, it is important to keep on top of refurbishment. A professional dredge bucket manufacturer should also offer the service of repair and refurbishment.

The refurbishment and repair of mining and dredging buckets is as skilled a job as manufacturing. The welding and fabrication processes are as complex and so a fully equipped workshop is required with a lifting capacity in the region of 15 tonnes. The welding should be to ASMA 9 standard or higher with a mobile line boring facility. Once the welding and fabrication has been completed the process of the abrasion resistant and steel plate coatings can be implemented.

If you feel you have been dealt with unfairly or have suffered some financial or other loss you would like investigating an Ombudsman is someone you can address the complaint to.

There are a number of Ombudsman Schemes in the United Kingdom. Some Ombudsmen are Government appointed, for example, The Local Government Ombudsman and The Financial Services Ombudsman, whereas others are industry appointed, such as the Telecommunications Ombudsman and the Surveyor Ombudsman. The Double Glazing Ombudsman is a similar non-statutory scheme.

The Ombudsman can save industry and consumers money. In addition to freeing up the court system, there are also opportunities to explore the potential for mediation and conciliation and come to a negotiated settlement which provides both parties with a means for proposed compromise. If this process proves fruitless, The Ombudsman can investigate further and, if necessary, provide a determination and award by arbitration. The Ombudsman’s decisions are legally binding on both parties and enforceable in the same manner as a judgement of the court.

Why Does The Double Glazing & Conservatory Industry Need An Ombudsman?

The industry has little regulation. Whilst standards of product are getting better problems still occur with mis-selling methods, badly installed products, unfulfilled remedial work and lengthy guarantees which are not honoured (due to traders going out of business or having an unwillingness to make good on their promises).

The general public still have a deep-rooted and long standing distrust of the industry. Many installers believe that the quality of membership of most Trade Associations and Installer Schemes doesn’t lend itself to the grouping of highly professional businesses who are customer focused.

The lack of consumer protection is considered appalling by many who experience problems. Most trade associations/ installer schemes do not have any “teeth” when called upon to intervene with complaints between installers and customers.

If the installer has been unprofessional or carried out unsatisfactory work and refuses to co-operate with the customer or trade association there is little any one can do…..until now.
The only legitimate options left for consumers were: (a) The Citizen’s Advice Bureau, (b) Trading Standards or (c) a trip to the local solicitor or county /high court. The former two can advise but often fail to persuade an intransigent installer to give the consumer satisfaction and the latter can be daunting and very often costly to the complainant.

The Ombudsman Scheme has an extensive Accreditation Procedure. This helps members achieve a higher standard of service, administration and consumer satisfaction. The Ombudsman Scheme has extensive legal powers to investigate complaints made against members. Any decisions made are legally binding and enforceable under the terms of The Arbitration Act 1996. Members have signed a legally binding contract at the point of entry into the scheme allowing the Ombudsman to investigate and thereby agreeing to abide by any decisions made.

The complaints process (consisting of conciliation, mediation, independent inspections and ultimately, if necessary, arbitration) is a totally free service to the consumer/complainant. This provides a level of protection hitherto unavailable in this industry to consumers.

In short, the scheme is long awaited, very well received by installers, the industry, consumer groups, the press and general public. The Ombudsman Scheme is a powerful way to help bring renewed consumer confidence and enhance the image of the industry. Members promote professionalism, competency and customer care, combined with a robust form of legal redress for justified complaints.

What sort of things can the Ombudsman investigate?
The Ombudsman can investigate a complaint only if:-
•    The complaint is against one of the Member Organisations.
•    The complaint is about something which happened during the period of membership.
•    The complaint relates to a member which operates in England, Wales, Scotland and Northern Ireland. The Ombudsman Scheme does not cover the Channel Islands, Isle of Man or foreign countries.

The Ombudsman will consider a complaint if the complainant believes they have been treated unfairly, the service received is unacceptable or a situation has led to distress, inconvenience or financial disadvantage.

What is there that the Ombudsman cannot or may not do?
The Ombudsman has no power to investigate something which is being, or has been, decided by some other Tribunal or Court. In some situations, the Ombudsman’s powers to investigate are limited. An example of this is:-
•    When another Ombudsman has statutory control and regulation of the subject matter of the complaint.
•    When the complaint involves an allegation of fraud which must be investigated by police as a criminal activity.