There are some important factors to consider before installation of a woodburning and multifuel stove.

What do I do first if I plan to fit a new stove?
If you planning to use an existing chimney it is recommended that you first have a ‘NACS’ registered sweep to sweep it. At the same time they will inspect and test your chimney to ensure that it draws and it doesn’t leak. Your installer will then be able to decide if your chimney needs re-lining.

What Size Stove Do I Need To Heat My Room?
There are two elements to consider when choosing your stove:
1) Physical Dimensions – Is there enough room for the stove to function and conform to building regulations.
2) Output – Do you have the right amount of heat for the room?

Height
You should ensure the top of the stove is around 22″ from any combustible material such as wooden lintels or beams. It is wise to check with the manufacturer of the stove you are interested in as the distanced advised may vary. If the top flue outlet is used, he height listed does not include the flue collar.

Width
Check that the stove will fit in the narrowest width of your fireplace if you are using one. If you decide on an inglenook, it is recommended that you have at least 150mm (6″) space either side of the appliance, although slightly for smaller output stoves this may be reduced. This is not a building regulation, but is necessary for the heat from the sides of the stove to enter the room and to protect against heat build up.

Depth
It is important to ensure you have the regulation 300mm (12″) of the hearth in front of the front legs of the Stovax stove once installed. You will also need a 50mm (2″) gap at the back of the stove. If you are planning to use the rear outlet, this will add around an extra 160mm.
Read the rest of this entry »